Windows 7 Network Error Code: 0x80070035 Windows cannot access\\__

Anonymous
2009-12-31T19:52:08+00:00

Let me state at the outset that I have had these two computers successfully networked in the last two weeks, but they will not stay networked.  This machine is running Windows 7 (64 Bit) and the other machine is running Windows XP Professional Service Pack 3, 32 Bit.  Both computers are set up to share everything in their C drives.  The XP machine has a D drive that is also set up to share.  In the last two weeks I have copied files back and forth between the two machines on all the drives.  Both computers still show up under the network folders for each machine.  Both computers are set up on the network with a workgroup name of HOME.  I have run the Network Troubleshooter on the Windows 7 machine and it does not detect any problems.  The Windows 7 Computer is named NEWCOMPUTER. The Windows XP computer is named OLDCOMPUTER.  I have also shut down the firewalls and Virus protection programs on both machines.  Network discovery is turned on for the Windows 7 machine.  File and printer sharing is turned on. File sharing connections are set to 40 or 56 Bit encryption.  Password protected sharing is turned OFF.  Windows is allowed to manage Homegroup connections.  Using the services.msc command, I set the Computer Browser properties startup type to automatic, the Server properties to automatic, the SSDP DEiscovery to automatic, and the TCP/IP NetBIOS Helper to automatic.

When I initially set up the Windows 7 machine, I tried to share the whole C drive with the Windows XP machine, but Windows XP would give an error message that said "Access denied you may not have permission..."  So I went into the Windows 7 machine and had to set sharing and permissions to full control for  everyone for every folder in the C drive.  Then the Windows XP machine was able to open, read, and change every file on the Windows 7 machine other than System files.  Now, when I click on the OLDCOMPUTER from the Windows 7 machine I get the error message "Error Code: 0x80070035 Windows cannot access\OLDCOMPUTER.  When I click on the NEWCOMPUTER from the Windows XP machine I get the following error:

"An error occurred while reconnecting Y:to\Newcomputer\C: Microsoft Windows Network: The Network path was not found. The connection has not been restored."

A GUEST account is also set up on the XP machine.  I am running a Netgear RP614v4****wired 4 port router that is connected via Ethernet cables to a Satellite Broadband modem.  There is also a printer connected to this same router.  Both computers can print to the printer via this router.  Both Computers can access the Internet.  They just cannot access each other.

Remember - This is a public forum so never post private information such as email or phone numbers!

Ideas:

  • Programs you are having problems with
  • Error messages
  • Recent changes you made to your computer
  • What you have already tried to fix the problem
Windows for home | Previous Windows versions | Internet and connectivity

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments No comments
Answer accepted by question author
Anonymous
2016-08-10T05:09:03+00:00

hi

I do this solution that I meet mentioned error (0x080070035);

it occure between xp & 7 sometimes

so in Start type secpol.msc

go this path -> local policies -> security options -> network security: Lan Manager ...

-> choose second choice -> Send LM & NTLM- use NTLMv2 session security if negotiated

maybe OK

Was this answer helpful?

600+ people found this answer helpful.
0 comments No comments
Answer accepted by question author
Anonymous
2010-01-01T19:41:35+00:00

Hi Mike Sutherland 777,

Welcome to Microsoft Windows.

I would suggest you to change the security firewall settings or disable security software on the system and try to access the location.

For more information you may visit the link mentioned below where the customer has come the similar problem.

http://social.technet.microsoft.com/forums/en-US/itprovistanetworking/thread/955717b7-9ea3-424c-9b3a-719520f1b043 /

Hope this information is helpful.

Regards,

Sujan – Microsoft Support

Visit our Microsoft Answers Feedback Forum and let us know what you think.

Was this answer helpful?

100+ people found this answer helpful.
0 comments No comments

117 additional answers

Sort by: Oldest
  1. Anonymous
    2017-11-16T20:44:20+00:00

    In all home LAN hubs I've seen, you can add a static reservation. This allows you to have a dynamic IP, but you can still make the hosts file specific.

    Interestingly, I haven't done any of this and my problem went away.

    Was this answer helpful?

    0 comments No comments
  2. Anonymous
    2017-12-18T19:32:55+00:00

    So what's the answer if the PC is in a corporate network with DNS servers and still can't see local servers either by name or IP address ?

    Funnily enough it can browse the internal website, the external web and gets email via Outlook. (O365 Cloud).

    All settings are normalised within our corporate policies, it is the only PC in about 1000 with the problem. Some of the earlier advice ( I have read them all ) is not possible within our security restrictions although as Admin I have tried most of them.

    And yes, we have local and overseas DNS servers in a very well regulated and  managed domain.

    Brent

    Was this answer helpful?

    0 comments No comments
  3. Anonymous
    2017-12-18T19:51:15+00:00

    Just found my answer !

    If you check Network, Local Area Connection Properties you will note that 'Client for Microsoft Windows' is missing from the top of the list.

    Click on the 'Install' button and reinstall it. Reboot. Fixed.

    I suspect this one was caused by product diagnostic software reconfiguring the adapter for connection purposes.

    Cheers

    Was this answer helpful?

    0 comments No comments