Windows 7 Network Error Code: 0x80070035 Windows cannot access\\__

Anonymous
2009-12-31T19:52:08+00:00

Let me state at the outset that I have had these two computers successfully networked in the last two weeks, but they will not stay networked.  This machine is running Windows 7 (64 Bit) and the other machine is running Windows XP Professional Service Pack 3, 32 Bit.  Both computers are set up to share everything in their C drives.  The XP machine has a D drive that is also set up to share.  In the last two weeks I have copied files back and forth between the two machines on all the drives.  Both computers still show up under the network folders for each machine.  Both computers are set up on the network with a workgroup name of HOME.  I have run the Network Troubleshooter on the Windows 7 machine and it does not detect any problems.  The Windows 7 Computer is named NEWCOMPUTER. The Windows XP computer is named OLDCOMPUTER.  I have also shut down the firewalls and Virus protection programs on both machines.  Network discovery is turned on for the Windows 7 machine.  File and printer sharing is turned on. File sharing connections are set to 40 or 56 Bit encryption.  Password protected sharing is turned OFF.  Windows is allowed to manage Homegroup connections.  Using the services.msc command, I set the Computer Browser properties startup type to automatic, the Server properties to automatic, the SSDP DEiscovery to automatic, and the TCP/IP NetBIOS Helper to automatic.

When I initially set up the Windows 7 machine, I tried to share the whole C drive with the Windows XP machine, but Windows XP would give an error message that said "Access denied you may not have permission..."  So I went into the Windows 7 machine and had to set sharing and permissions to full control for  everyone for every folder in the C drive.  Then the Windows XP machine was able to open, read, and change every file on the Windows 7 machine other than System files.  Now, when I click on the OLDCOMPUTER from the Windows 7 machine I get the error message "Error Code: 0x80070035 Windows cannot access\OLDCOMPUTER.  When I click on the NEWCOMPUTER from the Windows XP machine I get the following error:

"An error occurred while reconnecting Y:to\Newcomputer\C: Microsoft Windows Network: The Network path was not found. The connection has not been restored."

A GUEST account is also set up on the XP machine.  I am running a Netgear RP614v4****wired 4 port router that is connected via Ethernet cables to a Satellite Broadband modem.  There is also a printer connected to this same router.  Both computers can print to the printer via this router.  Both Computers can access the Internet.  They just cannot access each other.

Remember - This is a public forum so never post private information such as email or phone numbers!

Ideas:

  • Programs you are having problems with
  • Error messages
  • Recent changes you made to your computer
  • What you have already tried to fix the problem
Windows for home | Previous Windows versions | Internet and connectivity

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments No comments
Answer accepted by question author
Anonymous
2016-08-10T05:09:03+00:00

hi

I do this solution that I meet mentioned error (0x080070035);

it occure between xp & 7 sometimes

so in Start type secpol.msc

go this path -> local policies -> security options -> network security: Lan Manager ...

-> choose second choice -> Send LM & NTLM- use NTLMv2 session security if negotiated

maybe OK

Was this answer helpful?

600+ people found this answer helpful.
0 comments No comments
Answer accepted by question author
Anonymous
2010-01-01T19:41:35+00:00

Hi Mike Sutherland 777,

Welcome to Microsoft Windows.

I would suggest you to change the security firewall settings or disable security software on the system and try to access the location.

For more information you may visit the link mentioned below where the customer has come the similar problem.

http://social.technet.microsoft.com/forums/en-US/itprovistanetworking/thread/955717b7-9ea3-424c-9b3a-719520f1b043 /

Hope this information is helpful.

Regards,

Sujan – Microsoft Support

Visit our Microsoft Answers Feedback Forum and let us know what you think.

Was this answer helpful?

100+ people found this answer helpful.
0 comments No comments

117 additional answers

Sort by: Newest
  1. Deleted

    This answer has been deleted due to a violation of our Code of Conduct. The answer was manually reported or identified through automated detection before action was taken. Please refer to our Code of Conduct for more information.


    Comments have been turned off. Learn more

  2. Anonymous
    2012-09-15T08:44:29+00:00

    I think I know why this is happening.  Windows 7 and up default your IP address to IPv6.  If you ping your computer name you will see it is pinged back in IPv6 terms instead of IPv4.  For whatever reason you cannot file share in Windows if you are using IP6, I suspect that Windows is not able to properly resolve the computer name from them as others have suggested.  If you disable IPv6 in your adapter properties you should at least get a step closer.

    Edit: be sure to disable/re-enable your adapter.

    I just tried this and I got a different error message.  It stated that the folder was available (finally) but that the account I was on was not allowed to access it even though I have "everyone" allowed.  It seems there maybe something else blocking lan computers from accessing over the network.

    Why does Micro$oft always break things that are working in previous builds?  I never had this problem in Vista Ult.

    Edit 2:

    Figured it out!  You have to add "Everyone" to the Security tab permissions group on the folder you want to share as well as in the Sharing tab.  You may also need to disable IPv6 but I am not sure.  I am not going to re-enable it to find out; it is useless for local networks anyway.

    I should also note that I added the LocalAccountTokenFilterPolicy regkey at Local_Machine\Software\Microsoft\Windows\CurrentVersion\Policies\System as a DWord set to 1 and that I also moved from a "home" network to a "work" one to use the workgroup instead of homegroup.

    Was this answer helpful?

    0 comments No comments
  3. Anonymous
    2012-06-24T12:26:57+00:00

    Hi Mike Sutherland 777,

    Welcome to Microsoft Windows.

    I would suggest you to change the security firewall settings or disable security software on the system and try to access the location.

    For more information you may visit the link mentioned below where the customer has come the similar problem.

    http://social.technet.microsoft.com/forums/en-US/itprovistanetworking/thread/955717b7-9ea3-424c-9b3a-719520f1b043 /

    Hope this information is helpful.

    Regards,

    Sujan – Microsoft Support

    Visit our Microsoft Answers Feedback Forum and let us know what you think.

    Hi Sujan,

    Thanks for your invaluable advice.

    Regards,

    Shaffi

    Was this answer helpful?

    0 comments No comments