Random freezes with windows 7 - 64 bit

Anonymous
2009-10-28T19:01:43+00:00

I use to run Vista home premium x86 on a acer computer. This summer I downloaded Windows 7 rc x86. A month ago I bought all new parts and since I could use 64-bit system now I installed a 64-bit Windows 7.  Then did the problem start. Every new and then the computer freezes, some days over 30 times. I thought it was hardware problem and tried a lot of hardware finders and nothing helped. I also installed windows 7 rc my mothers laptop (The same version I use to have that work fine) that used to run on Vista home basic.. But her computer didn’t freeze it just got a black screen now and then.

The I started to suspect that it was because it was a beta version so when windows 7 were released I bought two of them a 32-bit and a 64-bit. But the problem didn´t go away. It´s still there and It´s kind of frustrating and even more now when I’m trying to write a essay.

I used windows upgrade advisor and it didn´t see any problem with an upgrade to windows 7. What can I do?

original title: Random freezes with windows 7

Windows for home | Previous Windows versions | Windows update

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments No comments
Answer accepted by question author
Anonymous
2009-11-14T19:44:19+00:00

Guys,

I might have the answer to your problems.  This might fix your sleep/suspend problems and your random freezing problems.  Bottom line is that the default and "auto" values in Win 7 and your BIOS might not produce a stable computer...even with a virgin install.

RANDOM FREEZES FIX:

My computer used to freeze randomly until I fixed the memory timings.  I suspected bad memory early on and tested it with MEMTEST, but it passed with flying colors.  I even tried swaping memory out, trying to eliminate bad memory and/or slots.  It turned out that it was a memory frequency/timings/voltage issue.  No more freezes!  If you have a similar setup, this will most likely fix it.  If not, then check your memory and/or power supply.

The "AUTO" settings in BIOS *may not* produce a stable setting.  You have to goto the ASUS support website and download the latest memory QVL and lookup the memory settings for your particular brand there.  For my memory (OCZX1333LV6GK(XMP)) I had to make the following adjustments in the BIOS:

DRAM Freq:1066  (even though my memory is rated at 1333 frequency, the QVL guide recommended a lower freq!)

7-7-7-16 for the rest of the timings.  The other settings I was able to leave in "AUTO"

DRAM BUS Voltage: 1.6

*warning: be sure to consult your memory/motherboard documentation...the wrong value could damage your components!

SUSPEND/SLEEP FIX:

My computer used to hang when coming out of sleep or wouldn't completely goto sleep.  This solution may be partially dependent on you fixing a random freezing issue if you have one. 

In your "advanced" power settings, disable "Hybrid Sleep".  That's it!  My motherboard doesn't like hybrid sleep.

*If you have a desktop with a UPS, Win 7 will treat it like a laptop and apply the battery settings....sooo make sure you adjust the "on battery" settings!

My setup:

Processor:Intel core i7 920

Motherboard:Asus P6T

Memory: OCZX1333LV6GK(XMP)    (ie. 6GB in 3 sticks)

Harddrive:  3 x WD Caviar Black drives in RAID 5

PSU: X3 1000W

Video card: 2 x NVIDIA 9800 GTX+ SLI

*I have all of the ASUS overclocking/energy savings programs uninstalled

*I have the latest BIOS 0801 and all the latest drivers installed

Nick

Was this answer helpful?

80+ people found this answer helpful.
0 comments No comments

966 additional answers

Sort by: Most helpful
  1. Anonymous
    2010-02-25T05:16:22+00:00

    BlokeUK, I switched to Windows Classic desktop and within 20 minutes had another freeze, so that didn't fix it for me. An interesting thing was that once again a Windows Live Messenger alert window was attempting to fade away, and the really interesting thing is that the alert window seems to ignore the Windows Classic settings - it has a semi-transparent border, not the hard-edged gray border of Windows Classic.

    well if thats the case then Windows Aero is not the cause in your case. hmmmm

    Was this answer helpful?

    0 comments No comments
  2. Anonymous
    2010-02-25T04:57:21+00:00

    I have this problem as well. Originally, I thought this was a hardware error, but after following one of the tips of this page, it does seem to be an audio page. Thank you all for your posts!

    I have managed to keep my Windows7 from crashing (yes, it would crash on the Windows7 start-up jingle) By deactivating every audio file option in the msconfig.

    Of course, I have no sound, but at least I can move forward in my troubleshooting.

    I turned off the following services in my system configuration:

    Windows Audio Endpoint Builder

    Windows Audio

    Creative Audio Engine Licensing

    Creative Audio Service

    I'm going to try following passionfly1 advice to see if that will work for me!

    [EDIT]

    After nearly 3 hours with technical support (I hope you all know you have tech support for free within 90 days of your activation)

    It was discovered that I have 2 sound cards (I knew that) But Windows 7 updates BOTH drivers and sets them both to primary sound cards after automatically updating them for you. This causes the freezing and congestion that was clogging up my computer.

    What I was told to do: And so far is has worked (For those of you with multiple sound cards [because one was integrated into your motherboard])

    1. Detirmine which one you will not use and remove it from the following places (For me, I removed my integrated sound card)

    a) Uninstall it from your device manager

    b) Uninstall the drivers from your documents and settings folder

    c) (optional) If your turning off your integrated sound card like me: You will need to set your internal sound card to disabled in your bios.

    I hope this helps you all! And before you try all this, please remember: Turn off your sound software in MSCONFIG before trying all these steps. At least it will confirm if you have the same problem as me.

    [EDIT]

    I still have the problem. It didn't work, but I hope it works for someone.

    disable the onboard built-in sound in the BIOS and uninstall the software for that onboard sound using a program like Revo Uninstaller. It helps to find residual files and registry entries and also creates a restore point during the uninstaller. Its freeware and does a hellava job of cleanly uninstalling software. If you follow my suggestions above at using the 3 freeware utilties to control the audiodg.exe insatiable memory appetite. The creative services can be turned off with the exception if you use Dolby sound, then don't. These services create more stress on the already poorly coded audiodg.exe file to create more problems for it causing it to crash. I wish I was not booted into a slow spare drive to do some data recovery work atm, or I would give you the link to the Creative post talking about those services and what they do but its on Creative forums for sure.

    You can of course in vise versa, uninstall the card audio software and remove the card too. Whichever is your preference. As much as I despise the bug-prone Realtek drivers of the past and the lack of truly Windows 7 certified drivers from Creative at this point in time its still the better driver to use providing you disable those Creative services.

    Btw, Creatives technical support is located somewhere in South Dakota I think and not in San Jose, CA. I had to use Mapquest, Google and some clever research to track down thier core technical support center which is nowhere near California. They had no idea of the audiodg.exe was a problem and since it was my task they gave to me to provide them this informtaion and I dropped the ball to do this when life priorities took over. I still do not think they know they are contributing to this audiodg.exe problem by bloating this processes memory use. They left it up to me to provide them the data, haha like lil ole me can solve all this SH_T we have to deal with >.<

    Was this answer helpful?

    0 comments No comments
  3. Anonymous
    2010-02-25T04:37:29+00:00

    That really is annoying.

    We buy a system that supposed to serve, and become servants to the system trying to make it barely work!..

    that was quality words!

    this is so dead on to the truth is almost makes me cry, lol

    Was this answer helpful?

    0 comments No comments
  4. Anonymous
    2010-02-25T04:35:06+00:00

    I have realtek audio as well - one of the many things I did do was uninstall the realtek driver, and allow the autodetect to install the MS "High Definition Audio Driver" driver.  That very likely could have been the cause of my recent stability

    • as my freezes were pretty infrequent to begin with, and I have changed a lot of things, so it's hard to tell. 

    Please search for my input in threads labeled with the word "audiodg.exe" in these forums. I think I have good input on how to negate or minimize the sound-related issues of Win7. Audiodg.exe has been a bugged, memory-leaking POS audio function since the early days of Vista and Win7 has not fixed this P O S of a file since then.

    Was this answer helpful?

    0 comments No comments