Disk Management Console view is not up-to-date.

Anonymous
2009-10-24T18:44:59+00:00

OS Name Microsoft® Windows Vista™ Ultimate

Version 6.0.6002 Service Pack 2 Build 6002

Other OS Description Not Available

OS Manufacturer Microsoft Corporation

System Name -----

System Manufacturer INTEL_

System Model DP45SG

System Type X86-based PC

Processor Intel(R) Core(TM)2 Quad CPU    Q6700  @ 2.66GHz, 2660 Mhz, 4 Core(s), 4 Logical Processor(s)

BIOS Version/Date Intel Corp. SGP4510H.86A.0083.2008.0819.1026, 8/19/2008

SMBIOS Version 2.4

Windows Directory C:\Windows

System Directory C:\Windows\system32

Boot Device \Device\HarddiskVolume1

Locale United States

Hardware Abstraction Layer Version = "6.0.6002.18005"

User Name -----

Time Zone Eastern Daylight Time

Installed Physical Memory (RAM) 2.00 GB

Total Physical Memory 2.00 GB

Available Physical Memory 691 MB

Total Virtual Memory 4.23 GB

Available Virtual Memory 2.38 GB

Page File Space 2.29 GB

Page File C:\pagefile.sys

Partition **** Disk #0, Partition #0

Partition Size **** 104.43 GB (112,134,193,664 bytes)

Partition Starting Offset 1,048,576 bytes

Partition **** Disk #0, Partition #1

Partition Size **** 361.33 GB (387,979,805,696 bytes)

Partition Starting Offset 112,133,668,864 bytes

I went to do something with partition magic (it recognized something with the pointers I believe, so I allowed it to automatically fix the error) and now I'm not even able to access Partition Disk #0, Partition #1 which is a drive that I used to store data (No OS).  It doesn't appear in 'My Computer', but does appear in Disk Management but it doesn't seem like I can do anything with it besides delete the partition.  There's a lot of data that I have stored and I don't want to lose it all.

I used a partition tool to find out what sectors each of the partitions are starting at and for one of them it's sector 15 and the other it is sector 33.  I'm not sure if that has any significance to my problem, but just thought I'd let it be known.

  • Program: Disk Managemet
  • Error Message: "The operation failed to complete because the Disk Management console view is not up-to-date.  Refresh the view by using the refresh task.  If the problem persists close the Disk Management console, then restart Disk Management or restart the computer.
Windows for home | Previous Windows versions | Performance and system failures

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments
Answer accepted by question author
Anonymous
2010-01-25T12:43:17+00:00

I solved this problem by going into device manager and uninstalling the usb drivers. Then when I plugged the hard drive back in it reinstalled the driver and worked.

Was this answer helpful?

300+ people found this answer helpful.
0 comments
Answer accepted by question author
Anonymous
2009-11-07T15:01:11+00:00

Hello trichard13,

Thank you for visiting the Microsoft Answers Community.

Try using diskpart to assign a drive letter to Disk #0, Partition #1.

·          Click Start Orb > type diskpart

·          Right-click diskpart in results above > click Run as administrator

·          Once diskpart loads type list volume, press enter

You should notice that you will see your partition that you use for your data, it should not show a drive letter assigned to it.

·          Type select volume 6 **** (replace 6 with the volume number assigned to the partition in question)

·          Type assign letter Z (replace Z with the letter that you want to assign to it)

When you look in Computer, you should be able to see your partition.

Hope this helps

Chris.H

Microsoft Answers Support Engineer

Visit our Microsoft Answers Feedback Forum and let us know what you think.

Was this answer helpful?

200+ people found this answer helpful.
0 comments

156 additional answers

Sort by: Oldest
Most helpful Newest Oldest
  1. Anonymous
    2013-11-11T21:03:20+00:00

    i just have one option (delete volume ) 

    what i should do sir

    Was this answer helpful?

    0 comments
  2. Anonymous
    2013-11-15T11:12:46+00:00

    hi.

    I'm having the same problem as the first guy.

    with select the HD with diskpart and i can see 3 partitions' however, when I use the detail command there are only 2 volumes instead of 3.

    I used the detail command on partition 3 and was told that there's no volume associated with it.

    is there a way to fix it? 

    Was this answer helpful?

    0 comments
  3. Anonymous
    2013-12-13T20:27:28+00:00

    Dears , 

    it seems from the post date (there are more than two years :) ) but I faced the same problem ..

    and want to share the solution with you as a reference for future solution ..

    First of all I had this problem with external hard disk after accepting the applying change for New Sector Number calculated by partition magic tool which I hate it too much after this massive error  (I guess this problem maight occur for internal hard disks as well ) then I did not format the disappeared partition and tried diskparttool and no solution .. also different tools for MBR and other stuff.

    finally I tried this software "Partition Wizard Technician Edition" ..

    1. install it ..
    2. open and right click on your partition  --> rename it
    3. restart is required to complete the task .. just restart the PC after applying the changes (renaming)
    4. black screen will appeared and the task of renaming will start ..
    5. then PC will restart
    6. and what after ??  just your partition will appear again in "My Computer"

    I know the feeling after finally can access all data that were in prison :)

    Note:

    Be patient and never format or make merege or shrink the other partitions

    Hope you get the benefits from this software

    Thanks All ..

    Was this answer helpful?

    0 comments