usb device not recognized in windows 7

Anonymous
2010-07-02T18:28:37+00:00

So it seems MS has a problem with " usb device not recognized in windows 7 ". A Google search will find no real solutions to the problem. I haven't found one hear ether. How can I have a handful of flash drives and external hard drives that will not work on only 2 Win7 systems that I know of ,yet work on others ? I never needed to download drivers from anyone to make them work on any other OS . I just plug them in and the work ... THE 1st TIME... not after trying all things that don't.  This is something that needs a REAL FIX. I should not have to pay Tech Support to find out why. This is clearly an OS Win7 problem. Thanks     This is real FRUSTRATING

Windows for home | Previous Windows versions | Devices and drivers

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments
Answer accepted by question author
Anonymous
2010-07-03T13:29:23+00:00

Hi DJBigBang,

1. Have any USB or external drives worked on your computer? 2. What is the make and model of your computer?

As all the hardware devices have drivers associated similarly USB devices also have it. Sometimes proper drivers do not get detected after the initial installation so reinstallation of the drivers helps resolve the issues.

You may check after uninstalling and reinstalling the USB drivers if you are able to connect. You may disconnect all USB devices and then perform the following steps:

1.     ClickStart, and then click Control Panel.

2.     ClickSystem and Maintenance, click System, and then clickDevice Manager.

Note If Control Panel is in Classic View, double-clickSystem, and then click Device Manager.

If you are prompted for an administrator password or for a confirmation, type the password, or clickAllow.

**3.**In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the Host Controller, click "Uninstall" and click "OK".

Check if at all there is an exclamation mark along the driver, it suggests issues with the driver installed.

4.     Repeat the step 2 to uninstall all items under "Universal Serial Bus controllers".

Then, restart your computer and Windows 7 will reinstall all USB controllers automatically.

If you still face the same issue then you may check for the updated USB device drivers using windows update. Refer to the below link for assistance–

http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly

If the issue sill persists I would request you to check for chipset driver updates which you can get at the manufacturer website. The chipset drivers normally incorporate USB controller drivers as well.

Hope this helps.

Thanks,

Meghmala – Microsoft Support

Visit ourMicrosoft Answers Feedback Forum and let us know what you think

Was this answer helpful?

100+ people found this answer helpful.
0 comments
Answer accepted by question author
Anonymous
2011-11-07T15:46:59+00:00

Hello DJBigBang,

There is an old Windows XP KB article that was recently updated with multiple steps to resolve these types of issues. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if this helps.

http://support.microsoft.com/kb/330140

Bobby

Was this answer helpful?

100+ people found this answer helpful.
0 comments

125 additional answers

Sort by: Most helpful
Most helpful Newest Oldest
  1. Anonymous
    2015-07-29T13:34:56+00:00

    Here's one you'll all love. 

    I've been doing some searching (message boards, tech sites, etc) to try and find a solution to my problem but I've found nothing. Here it is.

    I cannot get my USB DVD drive to be recognized by Windows 7. Yeah, I know. That's what we're all here for, but I've got more. The DVD drive in question worked fine when first installing Windows 7 on my computer, but after the system was installed and was finished downloading and installing all the updates from Microsoft.com, it stopped recognizing the drive. I can plug the drive into another computer and it works just fine. So, I know the drive is OK. I can plug other devices into the USB ports on my computer and they work just fine. So, I know the USB ports are working OK.

    I've tried doing all the fixes I've found like running Fix It and messing with my Registry entries and resetting my system memory by pulling out the battery. I've done ALL of that, but the computer still will not see my DVD drive. 

    It's not like my Device Manager is telling me that it can't recognize the drive either. I plug the drive in, the disk spins up but nothing happens on the computer. No unrecognized drive. No grayed out item or unknown USB item in the Device Manager. Just nothing. Nothing at all. I have been reduced to plugging my USB DVD drive into another computer on my network to install programs.

    All I can figure is that one of the updates, probably a Service Pack, messed something up. I have even gone through the trouble of wiping my computer and starting over from scratch, but the same thing happens.

    I could really use some help here.

    Was this answer helpful?

    0 comments
  2. Anonymous
    2015-06-03T16:08:36+00:00

    THANK YOU MEGHMALA! I had tried everything to recupe on my Sony walkman, and failed. But your directions were simple and worked perfectly. thanks a milion

    Was this answer helpful?

    0 comments
  3. Anonymous
    2015-05-16T18:21:45+00:00

    My solution will follow my quick background.

    I, like many others, had problems with Windows 7 recognizing and/or finding/installing drivers for numerous USB devices (keyboard, flash drives, webcam). I searched, read, and tried numerous solutions, NONE worked. Until this.

    So, since I FINALLY found a solution (for me), I wanted to 'give back' and share it with others in hopes that it will help some to resolve their issues.

    I found some .pnf files that did not have the same named .inf file in my C:\Windows\inf folder. I found a site that had the text for the .inf files. So I just tried something in hopes it would work, and thankfully it did.

    Here was what I did (very simple), and what you can try:

    1 - Go to your C:\Windows\inf folder

    2 - Make sure these files (at a minimum, there might be others) are listed in that folder:

    • usb.inf
    • usb2.inf
    • usbport.inf
    • usbprint.inf
    • usbstor.inf
    • usbvideo.inf

    3 - If any of the above files are missing, you'll need to create it. Even if they are there, it might be worth a shot to rename them (something like usb_original.inf), then replace each file with what follows.

    4 - Go to the website: http://www.infdump.com/ where you can find the text each file should contain by clicking on the top right Alphabet to find the specific file.

    Or you can use these quick links for your convenience:

    5 - For each of those pages you'll need to do this:

    A - [Ctrl-A] to copy all the text on the page, then [Ctrl-C] to copy

    B - Open Notepad, then [Ctrl-V] to paste

    C - Do a File>Save, click the File Type drop-down and select 'All Files', then name it the appropriate name (example: usb.inf, and it MUST have the extension .inf when you name the file) and save it in your C:\Windows\inf folder

    6 - I don't think there's a need to reboot, but unplug all of your connected USB devices, then plug them back in and Windows will start to recognize and install drivers, and if all goes well, everything should be working.

    Best of luck!

    This trick gave me a working G510s again. Thanks!! and !!!! :D

    (here was my case:)

    http://forums.logitech.com/t5/Logitech-G-Keyboards/G510s-device-not-recognized-on-ALL-USB-ports/m-p/1405913#M38870

    Was this answer helpful?

    0 comments