Cannot connect to Brother MFC-240c network printer from Windows 7 computer

Anonymous
2009-12-10T23:46:43+00:00

The base computer of my network that is directly connected to the internet and my router is a Windows Vista (32bit) machine. My computer is connected through the network to access the internet and the printer connected to the base computer. My computer was also running Vista and the networking worked fine.

I have installed Windows 7 (64-bit, not by option, did it automatically) on my computer, and now I cannot connect to the printer on the Vista machine. I can access the internet (although it is substantially slower than when I had vista) and the shared files on the base computer, but I cannot setup the printer. The printer is a Brother MFC-240c

If anyone can help it would be greatly appreciated.

Thank You

Windows for home | Previous Windows versions | Devices and drivers

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments
Answer accepted by question author
Anonymous
2009-12-11T00:21:00+00:00

I am assuming you are getting an error stating that the print driver for 64bit is not installed in the Vista machine.  You can either install a 64bit driver that has the same name as the x86 print driver on the Win7 machine and reattempt the connection, install the 64bit driver that has the same name onto the Vista machine (for other 64bit machines) but this is more difficult.

You can also configure the machine to check on Windows Update for a print driver that has the same name as the 32bit print driver.  If gpedit.mcs launches for the Windows version you have.

Computer Configuration

Administrive templates

Printers

Extend point and print connection to search windows update

If there is no matching driver name, you cannot make an RPC connection but you can create an SMB connection.  Search for Local Port.  There are many posts on this.

Alan Morris Windows Printing Team Search the Microsoft Knowledge Base here: http://support.microsoft.com/search/Default.aspx?adv=1

Was this answer helpful?

3 people found this answer helpful.
0 comments
Answer accepted by question author
Anonymous
2009-12-11T00:55:27+00:00

To share a network printer being hosted by a computer running a 32 bit operating system with another computer running a 32 bit operating system, Vista or XP, you would go to Control Panel > ‘Printers’ > ‘Add Printer’ > ‘Add a network printer’.  Apologies if you consider that I am stating the obvious.

Sharing a printer being hosted by a computer running 32 bit Vista or XP with a computer running 64 bit Vista is not obvious, because if you use the above method, it will not work.

So how? First, you need to know the name of the computer which hosts the printer, and the name of the printer to be shared.

Sitting at the host computer: The procedure is the same for Vista and XP

Start > My Computer > Properties > Computer Name tab > Change button. Write down the name that you see here because this is the computer name.

Start > Settings > Printers and Faxes > Right click on the printer to be shared > Properties > Sharing tab. Write down the name that you see here because this is the printer name.

OK. Now sit in front of the Vista 64 computer:

Start > Control Panel > Printers > Add printer > Add a local printer > Click on ‘Create a new port’ > ‘Local Port’ > ‘Next’.

The port name will look like this: \Computer name\printer name

So enter the names already retrieved, ensuring that you use the same format, then click ‘OK’.

At this point, you will be presented with the ‘Add New Hardware’ process. You can either select the make and model of your printer from the lists or insert your printer installation disk if you can’t find yours. The printer will be added, and you should be able to print a test page.

Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

Was this answer helpful?

2 people found this answer helpful.
0 comments

76 additional answers

Sort by: Most helpful
Most helpful Newest Oldest
  1. Anonymous
    2011-08-11T17:29:23+00:00

     How did you ever come up with this and where do I find the info about the logic behind this?  

    I am BEDAZZLED! 

    Thanks to you I no longer need to have 2 different printers on at my house.  I am now going to save on buying 2 types of ink cartridges.  Furthermore, I am saving Money and the earth by reducing electricty costs.   

    A Round of applause is in order!   Now I am off to set this up at my 3 other hoseholds that have the same issues,  

    Can this day get any better?  

    To share a network printer being hosted by a computer running a 32 bit operating system with another computer running a 32 bit operating system, Vista or XP, you would go to Control Panel > ‘Printers’ > ‘Add Printer’ > ‘Add a network printer’.  Apologies if you consider that I am stating the obvious.

     

    Sharing a printer being hosted by a computer running 32 bit Vista or XP with a computer running 64 bit Vista is not obvious, because if you use the above method, it will not work.

     

    So how? First, you need to know the name of the computer which hosts the printer, and the name of the printer to be shared.

     

    Sitting at the host computer: The procedure is the same for Vista and XP

     

    Start > My Computer > Properties > Computer Name tab > Change button. Write down the name that you see here because this is the computer name.

     

    Start > Settings > Printers and Faxes > Right click on the printer to be shared > Properties > Sharing tab. Write down the name that you see here because this is the printer name.

     

    OK. Now sit in front of the Vista 64 computer:

     

    Start > Control Panel > Printers > Add printer > Add a local printer > Click on ‘Create a new port’ > ‘Local Port’ > ‘Next’.

     

    The port name will look like this: \Computer name\printer name

    So enter the names already retrieved, ensuring that you use the same format, then click ‘OK’.

     

    At this point, you will be presented with the ‘Add New Hardware’ process. You can either select the make and model of your printer from the lists or insert your printer installation disk if you can’t find yours. The printer will be added, and you should be able to print a test page.

    Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

    Was this answer helpful?

    0 comments
  2. Deleted

    This answer has been deleted due to a violation of our Code of Conduct. The answer was manually reported or identified through automated detection before action was taken. Please refer to our Code of Conduct for more information.

    Comments have been turned off. Learn more

  3. Anonymous
    2011-07-19T03:41:38+00:00

    I used these steps connecting a laptop with windows 7 to a printer connected to a server running 32 bit XP. At the end it asks you to select your printer make and model. I selected the make (Kodak) and tried ALL of the different models until one worked. In this case it was a 3250, and the 5200 series worked....go figuer but it worked. That was the most time I have ever spent connecting to a network printer.

    Was this answer helpful?

    0 comments