Windows 7 Installer will not recognize SSD

Anonymous
2010-06-20T18:15:57+00:00

I have just built a new computer and I want to install 64-bit Windows 7 Professional on an Intel X-25M 80GB SSD.  I am doing a clean install on a new drive.  When I get to the point in the Windows 7 installation that asks which drive I want to install the OS on, it does not show the Intel X-25M.  It will show my other drives, however.  If I unplug the other drives, it just shows a blank window instead of showing the Intel X-25M.  I get a message saying it could not find a valid signed driver.  I bought the retail version of the SSD, not an OEM.

I am using a Gigabyte GA-X58A-UD7 motherboard and an Intel i920 CPU.  The motherboard BIOS has no problem detecting and identifying the X-25M.  I have the X-25M configured as an IDE.  I updated the firmware of the SSD, but it did not help.

Windows 7 compatibility page shows no compatibility problems with the X-25M, but it apparently needs a signed driver, and I do not know how to get one.

Any suggestions?

Windows for home | Previous Windows versions | Devices and drivers

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments
Answer accepted by question author
Anonymous
2010-06-21T05:58:44+00:00

Does it show the SSD at all? I would check to see that it's indeed being picked up by the BIOS and if not, check the cables.

Occasionally, Windows setup can chuck a fit when it discovers a drive with an invalid MBR/boot sector and won't install to it. To fix this, you could try the following

1.Boot up Windows 7 disc.

2.When the welcome screen comes up on Windows Setup, press Shift + F10, which will display a command prompt.

3.Type "diskpart" (no quotes) and press enter.

4.Type "list disk" and press enter.

5.Hopefully you can see your SSD in the list. You should see a number identifying it. Now type "select disk X" (where X is the number identifying your SSD) and press enter.

6.Type "clean" and press enter. This will write a blank MBR, YOU WILL LOSE ANY DATA ON THE SSD if you did have anything on it.

Hopefully one of these tips helps :

)

Was this answer helpful?

200+ people found this answer helpful.
0 comments

72 additional answers

Sort by: Newest
Most helpful Newest Oldest
  1. Anonymous
    2017-07-29T11:35:49+00:00

    For anyone that still has this issue.

    Shows up on BIOS and in DISKPART but after cleaning the disk and rebooting the issue remains.

    What worked for me is that I was using USB 3.0, I switched to 2.0 and bang, it's installing.

    Regards,

    Was this answer helpful?

    6 people found this answer helpful.
    0 comments
  2. Anonymous
    2017-03-03T18:36:02+00:00

    Another option to try which worked for me after going through all of these suggestions is to drop your USB compatibility down from 3.0 to 2.0 in your BIOS. My Panasonic Toughbook CF-C2 (CF-C2CCBZXCM) kept asking for drivers during the Windows installation process until I made this change. Hopefully this helps some others out.

    Was this answer helpful?

    6 people found this answer helpful.
    0 comments
  3. Anonymous
    2017-02-04T12:58:53+00:00

    Hi All

    It worked for me :-)

    Installed the HF and then the disk was there.

    Thank you. Saved my day.

    Was this answer helpful?

    0 comments
  4. Anonymous
    2016-10-27T15:15:23+00:00

    YES!

    After fighting and fighting and fighting will the install from a USB stick, I tried booting from the DVD and now I can select my SSD to install from.

    Man, what a major pain in the backside!

    Thank you!!!

    Was this answer helpful?

    0 comments