I'm having an odd experience with the screen brightness of my SPX. Here's the sequence: Turn on the SPX to wake it from sleep. The screen appears to be at about 60% brightness . Press F7 (increase brightness). The screen brightness widget appears briefly, showing 100% brightness. The screen brightness doesn't change . Open Settings, navigate to System ->Display page. The Display brightness slider is at 100%. (Change brightness automatically is unchecked.) Click the Display brightness slider at about the 80% mark. The screen immediately brightens (confirming that it was well below 100%) . Click the slider at the 100% mark. The screen brightens to 100% . This sequence is the only way I can get 100% brightness after the SPX has been in sleep mode. Thoughts? [Note: this is with the SPX connected to power. I haven't tried it on battery. The advanced power settings are standard Balanced. The system is on Windows Insider Fast Track, and is up-to-date.]

I've got four Surface Pro X's, all doing this as well..... and have tried all steps described in this thread with no success.....

I am also on the same insider build 19041.1, experiencing the same behavior for a couple of insider flights now. I am not sure whether the non-insider version (surface pro x out of the box) had the same issue. maybe someone else with a surface pro x that is not on the insider track could confirm? I have filed a problem report on feedback hub as well. I was on insider builds but kept getting green screens so restored SPX to "out of box". I get similar to Geoffrey - screen dims by itself after a few minutes (Change Brightness automatically is NOT ticked). If I click on the slider exactly where it was, screen reverts to the brightness setting I had previously.

I am experiencing the same issue with two Surface Pro X devices we recently purchased. I suspect this issue may be widespread.

We seem to be stuck in a loop. I've tried every alternative that you've suggested; none has worked. You're now asking me to do the same thing again. Isn't that the definition of insanity? From this thread, it's pretty clear that this is a widespread issue. Yes, it's frustrating that it's not 100% repeatable. (For example, I woke my SPX this morning without any display brightness issues. A couple of hours later, the problem reappeared.) The Fresh Start process doesn't work (as described up-thread). The only option would seem to be to get a USB thumb-drive, create a bootable Win10 installer, and reinstall everything from that. I'm not ready to do that right now, because this is my current production device.

Hello GeoffreyMArnold, Thank you for reaching out Microsoft Community. We really appreciate all the efforts that you did just to possibly resolve the issue. If that won't work we can try another method and it is the media creation tool Click here it is more likely with the fresh start. To start click that link and select download tool now, let the tool run and finish, after that please observe the device if the issues till persist. If this answer your question, we highly encourage you to inform our Community by clicking on Yes or marking my post as an answer. This will help other members who may have the same issue as you. Otherwise, don't hesitate to update us so we can further assist you. Regards, Jonas_T

Surface Pro X display brightness issue.

Anonymous

I'm having an odd experience with the screen brightness of my SPX. Here's the sequence:

Turn on the SPX to wake it from sleep. The screen appears to be at about 60% brightness.
Press F7 (increase brightness). The screen brightness widget appears briefly, showing 100% brightness. The screen brightness doesn't change.
Open Settings, navigate to System ->Display page. The Display brightness slider is at 100%. (Change brightness automatically is unchecked.)
Click the Display brightness slider at about the 80% mark. The screen immediately brightens (confirming that it was well below 100%).
Click the slider at the 100% mark. The screen brightens to 100%.

This sequence is the only way I can get 100% brightness after the SPX has been in sleep mode. Thoughts?

[Note: this is with the SPX connected to power. I haven't tried it on battery. The advanced power settings are standard Balanced. The system is on Windows Insider Fast Track, and is up-to-date.]

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments

48 answers

Anonymous

2020-01-09T19:35:15+00:00

I've got four Surface Pro X's, all doing this as well..... and have tried all steps described in this thread with no success.....
Was this answer helpful?

0 comments No comments
Anonymous

2019-12-29T14:17:58+00:00

I am also on the same insider build 19041.1, experiencing the same behavior for a couple of insider flights now. I am not sure whether the non-insider version (surface pro x out of the box) had the same issue. maybe someone else with a surface pro x that is not on the insider track could confirm?

I have filed a problem report on feedback hub as well.

I was on insider builds but kept getting green screens so restored SPX to "out of box". I get similar to Geoffrey - screen dims by itself after a few minutes (Change Brightness automatically is NOT ticked). If I click on the slider exactly where it was, screen reverts to the brightness setting I had previously.
Was this answer helpful?

0 comments No comments
Anonymous

2019-12-26T17:36:39+00:00

I am experiencing the same issue with two Surface Pro X devices we recently purchased. I suspect this issue may be widespread.
Was this answer helpful?

0 comments No comments
Anonymous

2019-12-23T18:41:58+00:00

We seem to be stuck in a loop. I've tried every alternative that you've suggested; none has worked. You're now asking me to do the same thing again. Isn't that the definition of insanity?

From this thread, it's pretty clear that this is a widespread issue. Yes, it's frustrating that it's not 100% repeatable. (For example, I woke my SPX this morning without any display brightness issues. A couple of hours later, the problem reappeared.)

The Fresh Start process doesn't work (as described up-thread). The only option would seem to be to get a USB thumb-drive, create a bootable Win10 installer, and reinstall everything from that. I'm not ready to do that right now, because this is my current production device.
Was this answer helpful?

0 comments No comments
Anonymous

2019-12-23T17:51:05+00:00

Hello GeoffreyMArnold,

Thank you for reaching out Microsoft Community. We really appreciate all the efforts that you did just to possibly resolve the issue.

If that won't work we can try another method and it is the media creation tool Click here it is more likely with the fresh start.

To start click that link and select download tool now, let the tool run and finish, after that please observe the device if the issues till persist.

If this answer your question, we highly encourage you to inform our Community by clicking on Yes or marking my post as an answer. This will help other members who may have the same issue as you. Otherwise, don't hesitate to update us so we can further assist you.

Regards,

Jonas_T
Was this answer helpful?

0 comments No comments